Requesting Static Routing

Step

Action

From the Routing menu under the IP Management tab, click New Routing.

Result:  The Customer Information screen appears.

From the New or Existing Service? radio buttons, select whether you want Static routing for a new service or an existing service.

Result:  The system refreshes your browser window, displaying fields appropriate for your selection.

Verify that the information in the First Name, Last Name, Phone, and Customer Technical Contact E-mail Address fields is correct.  Update the fields as necessary.

Are you configuring Static routing for a new service or an existing service?

Click .

Result:  The Modify Routing screen appears.

From the Type of Product drop-down list, choose the service for which you want to modify Static routing.

From the Type of Routing radio buttons, select Static.

Result:  The system refreshes your browser window, displaying the fields necessary to configure your Static routing.

From the Do you want to route these blocks over more than one connection with Qwest? radio buttons, select whether or not you need your routes to make multiple connections with Qwest.

Result:  The system refreshes your browser window.

In the Number of static routes needed field, type the total number of routes you want to configure.

Click .

Result:  The system refreshes your browser window, displaying the appropriate number of IP Address Block, CIDR Prefix Length, Serial Address, and Circuit ID.

In the IP Address Block field(s), type the IP address(es) of your routers for which you need static routing.

From the CIDR Prefix drop-down list(s), select the appropriate value(s) to indicate the number of addresses that are available within each IP address block.

In the Serial Address field(s), type the IP address(s) of the Qwest serial routers to which you are configuring static routing.

In the Circuit ID field(s), type the unique identifier of each static route you want to define.

In the Add Additional Comments box, type any more information that will help us configure your BGP routing.

Click .

Result:  The system attempts to save your data, then refreshes your browser window.  A message appears, indicating the success or failure of your submission.